Test Tube, Porcelain Spot Plates, And Watch Glass

The image is Pixabay property

Laboratory equipment that can be used as a container to identify a chemical substance is test tube, porcelain spot plates, and watch glass. The test tube is made of glass, transparent, colorless, can be heated in a direct flame or heated in water or in a tool such as autoclave in accordance with the temperature needed. The test tube is shaped like a pipe of which one end is open or has no lid. test tube has a diameter of approximately 2 cm with a height of 10 to 15 cm. The test tube is used for mixing or reacting chemicals, or can be used as containers agar in microbiology lab with a lid that is used is a sterile cotton.

If in hot conditions, tube clamp made of wood can be used to hold the test tube. Clamp tube shaped like a pair of scissors, but not sharp, in the middle there is a perforation circle as a place to clamp the test tube. Tube clamp has a thickness of 1 cm and colored wood is light brown. a tube rack is used To enforce or holding a test tube so it does not roll or fall. Tube rack made of wood or stainless steel, in the form of rectangular boxes that have shelf-perforation perforation as a place to enter the tube. The test tube can also be used as a container of the pipette, such as graduated pipette, Pasteur pipette, and volumetric pipette. So that the tip of the pipette that is being used is not dirty. How to use it is insert the tip of a pipette to take a liquid and then put into a test tube, these two tools can be stored in a table or can be stored in a tube rack, so that the position of pipettes and test tubes in a standing position.

When mixing two different liquids in test tubes, it's rather difficult to stir, since the diameter of a test tube is small, if inserted stir bar will increase the volume of the substance contained in a test tube and might overflow. If the test tube shaken by hand, the two fluids will be mixed but not optimal. the centrifuge machine is to stir the liquid in a test tube so it can mixed perfectly.

Centrifuge machine is a machine that in the middle of it there is a circle made by metal plate coated with rubber. This tool has a working principle based on centrifugal. The metal is rotating at high speed. Speed can be adjusted as needed. If a test tube putted on top of the substances contained in the tube will spin faster and stirred perfect, but the test tube must be held in tandem. If there are deposits of a substance in a test tube, the sediment will condense and separate from the solution.

The test tubes can also be used as a agar container in the microbiology lab. How to use it is, pipette 10 ml of agar solution, and then insert it into the test tube. Then close the tube with cotton so that there is no substance that can enter into the tube or out of the tube. After that unites the test tubes containing a agar solution, for example 10 test tubes and tie with using rubber bands or straps. So that it can stand. Then wrap in paper and put in the autoclave to sterilize.

After sterilization in autoclaves, test tubes will be hot and the agar in liquid form. After stored at room temperature until cool, put them in the refrigerator so it can be used in the long term. If the media want to be used, then grab a solid agar medium from the refrigerator and open the paper wrapping paper and place the test tubes in a rack tube. Do not open the cotton cover tube before it will be used to keep the media remain stable.

Before and after using the test tubes, it must be washed with water and then with soap, and the inside of the tube thoroughly with a brush to clean the tube. Then the last rinsed again with water. Then rinsed with distilled water three times or dried in an oven. Or it could be drained in a tube rack by position upside down, so that the water in a test tube will go down and test tube will dry quickly.

Another tool that can be used to identify a substance is porcelain spot plates. It is made of white porcelain, a box-shaped measuring 10 cm x 10 cm with a thickness of 1 cm. At the top of the porcelain spot plates, there are small hollows semicircle with a diameter of 1 cm and depth 0.5 cm. porcelain spot plates are widely used in qualitative analysis to identify the chemical substance.

How to use the porcelain spot plates that take the substance to be identified, for example, in the form of a solution, using a Pasteur pipette and drops into one of the hollow of porcelain spot plates 2 to 3 drops, then grab a reagent with a Pasteur pipette and dropped into the above sample solution was 2 to 3 drops, See the color changes or other reaction was made. Before and after using porcelain spot plates, it should be washed with water and then with soap, and the inside of the hollow tube thoroughly with a brush to clean. Then the last rinsed again with water. Then dried in an oven or wiped with a tissue.

Another tool that can be used in identifying a substance that is a watch glass. This glass existing circular hollow in the middle. Watch glass has various size diameter of 2 cm, 5 cm, 7 cm, 10 cm, 15 cm, and etc. Watch glass are made of glass and transparent or colored green. How to use the watch glass that take the substance to be identified is, for example, solids are taken with a spoon as much as 1 gram, or a solution is taken using a pipette 1 ml, place it above the watch glass, then grab a reagent with a pipette and drop it on top of the watch glass containing sample earlier. See the changes or the reaction made.

Before and after using the watch glass, it must be washed with water and then with soap, and the inside of the hollow tube thoroughly with a brush to clean. Then the last rinsed again with water. Then dried in an oven or wiped with a tissue. Watch glass also has other functions which can be used as a cover glass beaker or Erlenmeyer. Can also be used as a container for placing solids sample or chemicals.

That is part of the lab tools that can be used to identify chemical substances in a sample or qualitative analysis.